Aerohive SR2148P 48 Port Network Switch

The SR2148P is a high-performance 52 port switch with 48 ports 802.3at PoE+ and 4 additional 10-Gigabit SFP/SFP+ ports

Datasheet Evaluate & Buy


The SR2148 combines enterprise-class access switching with cloud- enabled management and on-demand provisioning to provide the industry’s most advanced networking feature set to the edge of your network. Built on the deep, feature-rich HiveOS operating system, the SR platforms offer state-of-the-art gigabit switching with advanced features like user-based QoS, storm control, and 802.1X multiple authentication for voice and data coexistence, along with traditional switch features such as LLDP, Spanning Tree, and IGMP snooping.


  • Secure Switching with On-Demand Provisioning
  • Cloud-Enabled Stacking
  • Unified Platform
  • Interfaces

    52 dedicated Ethernet ports − 48x 10/100/1000Mbps RJ45 ports − 4x SFP/SFP+ 1 Type-A USB2.0 port backware compatible with USB1.1 1 Reset button to reset (on press) and load factory default settings (when pressed for more than 5 seconds) 1 LEDs button to cycle Link/Speed/Duplex/PoE status 1 RJ45 serial console port 1 Redundant Power Supply connector (rear)

  • Power over Ethernet

    48 ports 802.3af/802.3at PoE/PoE+ with legacy support 30 Watts max per port 779 Watts total power budget PoE Prioritization and Reporting

  • Ethernet Switching

    16,000 MAC addresses Jumbo Frames (9600 bytes) QoS Line-rate switching IGMP Snooping Storm control Rate limiting Spanning Tree: STP, RSTP

  • Environmental

    Operating: 0 to +40 degrees C Storage: -20 to +70 degrees C Humidity: 5% to 95% RH (non-condensing) Altitude: 3000m Low-Noise: Less than 48dBA at full power - Temperature-controlled fan speed

  • MTBF

    200,000 hours at 25 degrees C

  • Power

    100-240 Volts, 12 Amps

  • Other Features

    Full Trusted Computing Group (TCG) Trusted Platform Module (TPM)

  • Mounting

    Rack-mountable Desktop

  • Datasheet


    Aerohive SR2148P Datasheet (108 KB)

  • Other


    HiveOS 6.0 Switching Datasheet (97 KB)

  • Download

    Mobility Optimized Access Layer Solution Brief (1 MB)

  • Download

    Aerohive QuickStart for the SR Series Switches (332 KB)

  • More Resources


    Aerohive SR2148P Hardware User Guide

Features & Benefits

Hardware Platform icon

Hardware Platform

  • 48 ports 802.3at and 802.3af PoE/PoE+
  • 4 10GbE SFP+ ports with support for 1GbE SFPs
  • 779 Watt power budget
  • Low-power consumption with 802.3az support (EEE)
  • Dedicated SFP/SFP+ uplinks
  • USB for future 3G/4G WAN connectivity
Security Features icon

Access Switching

  • Robust QoS with 8 queues per port
  • Marking and policing with 802.1p and/or DiffServ
  • Priority queuing for Voice
  • Cloud-enabled stacking
  • Jumbo Frame (9600 byte) support
  • Port mirroring for traffic monitoring
  • Link Aggregation
  • Dual-authentication with 802.1X and MAC auth
  • 802.1ab Link Layer Discovery Protocol (LLDP)
  • 802.1Q VLAN tagging
  • Spanning Tree, including STP, RSTP and MSTP
Advanced Features icon

Secure Routing

  • HiveOS Routing with IPsec
  • Identity and Policy-Based Routing
  • NAT
  • Dual WAN support
  • Identify-based routing

Our Customers



  • Wireless Network Solutions for Enterprises

    Build on the power of Wi-Fi and the Cloud to unlock the potential of mobility, transforming how you engage your customers and staff, with smarter access to information, insights, and applications more