AP150W

802.11ac Wave 2 3x3:3 Wallplate Access Point and Switch

The industry’s first Wallplate Access Point and Switch with embedded IoT capability in a compact form factor designed for both mounting on a wall or placement on a desktop

Datasheet Evaluate & Buy

Overview

The AP150W is the industry’s only wallplate 3x3:3 802.11ac Wave 2 Wi-Fi Access Point and wired Switch cloud-managed by Aerohive’s next-generation HiveManager NG. It delivers high performance wireless data rates up to 1.3 Gbps, integrated Bluetooth Low Energy (BLE) and ZigBee for IoT connectivity, and 4 Gigabit Ethernet ports that can also power VoIP phones, IoT sensors, and cameras.

Deployment Use-cases

  • Higher education - University dorm rooms
  • Hospitality – Hotel rooms/suites/cruise ships
  • Long term care units
  • Multiple Dwelling Units (MDU)
  • Retail – In-store connectivity including checkout kiosks
  • Radio Specifications—802.11ac

    • 5.150–5.850 GHz Operating Frequency
    • 802.11ac Modulation (256-QAM)
    • Rates (Mbps): MCS0–MCS9 (6.5Mbps – 1300 Mbps), NSS = 1-3
    • 3x3:3 Stream Multiple-In, Multiple-Out (MIMO) Radio
    • VHT20/VHT40/VHT80 support
    • TxBF (Transmit Beamforming)

  • Radio Specifications—802.11n

    • 2.4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
    • 802.11n Modulation
    • 2.4 GHz: Rates (Mbps): MCS0 - MCS15 (6.5Mbps - 300Mbps)
    • 5 GHz: Rates (Mbps): MCS0 - MCS15 (6.5Mbps - 450Mbps)
    • 3x3 Multiple-In, Multiple-Out (MIMO) Radio for 5 GHz
    • 2x2 Multiple-In, Multiple-Out (MIMO) Radio for 2.4 GHz
    • HT20 High-Throughput (HT) Support (for both 2.4 GHz and 5 GHz)
    • HT40 High-Throughput (HT) Support for 5 GHz

  • Radio Specifications—802.11g

    • 2.4–2.5 GHz Operating Frequency
    • Orthogonal Frequency Division Multiplexing (OFDM) Modulation
    • 20 dBm (100 mW) Transmit Power
    • Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback

  • Radio Specifications—802.11b

    • 2.4–2.5GHz Operating Frequency
    • Direct-Sequence Spread-Spectrum (DSSS) Modulation
    • Rates (Mbps): 11, 5.5, 2, 1 w/auto fallback

  • Radio Specifications—802.11a

    • 5.150–5.850 ˆ Operating Frequency
    • Orthogonal Frequency Division Multiplexing (OFDM Modulation
    • Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback

  • Antennas

    • 2x Integrated single band, 2.4-2.5 GHz Omnidirectional antennas
    • 3 x Integrated single band, 5.1-5.8 GHz Omnidirectional antennas
    • 1 x BLE internal antenna
    • 1 x zigbee internal antenna

  • Interfaces

    • Eth0 / POE Input: Autosensing 10/100/1000 Base-T Ethernet POE Input Port
    • Eth1 / PoE Output: Autosensing 10/100/1000 Base-T Ethernet PoE Output Port
    • Eth2 / Eth3: 2x Autosensing 10/100/1000 Base-T Ethernet Port
    • Passive pass thru connection : 2 x RJ-45 port (from the back of the AP to the bottom)
    • Built-in BLE and Zigbee (future use)
    • RJ-45 Console Port

  • Physical

    • WxDxH: 4.2” x 1.1” x 6.9” (105.9mm x 29.2mm x 175mm)
    • Weight: 0.86 lb / ( 0.39 kg)
    • Wallplate Bracket Weight: 0.26 lb ( 0.1 kg)

  • Environmental

    • Operating: 0 to +40°C, Storage: -40 to +70°C
    • Humidity: 95%

  • Mounting

    • Wallplate (included with the AP)
    • Desk mount (sold as an accessory)

  • Power Consumption

    • 802.3af Input: Typical 11.3W, Max 12.4W
    • 802.3at Input: Typical 23.6W, Max 24.9W (with 12W POE Output Load)
    • 48VDC Input: Typical 26.9W, Max 28.2W (with 15.4W POE Output Load)

  • Power Options

    • IEEE 802.3af / 802.3at (PoE/PoE+)
      • With IEEE 802.3af PoE power, AP150W will power up and the Wi-Fi and Ethernet ports will operate in its full capacity. In this scenario, POE budget on the downlink port is not supported
      • With IEEE 802.3at PoE power, AP150W will power up and the Wi-Fi and Ethernet ports will operate in its full capacity. In this scenario, the available POE budget on the downlink port is 12W
    • Power supply 48VDC, 0.75A (sold as an accessory)
      • With 48VDC input, AP150W will power up and the Wi-Fi and Ethernet ports will operate in its full capacity. In this scenario, the available POE budget on the downlink port is 15.4W

  • Datasheet

    Download

    Aerohive AP150W Datasheet (297 KB)

  • Download

    Aerohive HiveOS Datasheet (143 KB)

  • Guides

    Download

    Aerohive 802.11ac Access Points At-a-Glance (458 KB)

  • More Resources

    VIEW

    Aerohive AP150W Hardware User Guide

  • VIEW

    AP150W Desktop Bracket Installation Guide

AP150W Videos

Features & Benefits

Enterprise Connectivity

Enterprise Connectivity

  • Easy and intuitive installation for single and dual gang wall boxes
  • The 5 GHz band supports 3x3:3 SU-MIMO (1.3 Gbps of data rate) and 2x2:2 MU-MIMO (867 Mbps of data rate)
  • Additional Gigabit Ethernet managed port, providing secured connectivity to wired end-points like laptops, set-top boxes, IP phones, cameras, printers etc
  • Built-in BLE for iBeacon and beacon management applications
  • Future support for Zigbee to support IoT sensor use cases
Cloud Management

Cloud Management

  • Network Device and Client Monitoring
  • Global Search and Filter function
  • Auto-Provisioning Tools for quick and easy deployment
  • Versatile RF Planning
  • Guided Network Configuration Setup
  • 802.1X and PSK Secured Networks
  • Guest Access functionality with configurable Captive Web Portal
HiveCare Support

HiveCare Support

  • HiveCare Community Support: forum-based interactive support included
  • Additional optional support upgrade options available
  • Wide array of online resources and tools

Aerohive Access Points Matrix

Explore the portfolio of Aerohive's indoor and outdoor wireless access points.

Compare Access Points

Solutions

Industries

Articles